Skip to main content
Service client: (800) 626-7096
Service client: +49-212-701-1
Français

Pick your region

ProShield XGT

The Next Generation of Wheel Protection

ProShield XGT™

Accuride set out to create an easy to clean wheel protection technology that would eliminate filiform corrosion on coated aluminum wheels while minimizing the damage from road salts and debris. All of this, along with a finish that lasts the life of the wheel.
Filiform corrosion has increasingly become a concern due to harsher operating conditions and the aggressive chemical makeup of snow and ice products.
Corrosion

What is Filiform Corrosion?

Filiform corrosion occurs commonly within metallic alloys that use an organic type of coating when exposed to warm and humid air.

This corrosion often forms as a result of the coating material being damaged – a scratch, or pit from an impact.

ProShield XGT™ not only minimizes damage from impacts and scratches, it also prevents unsightly corrosion from forming if they are damaged.

ProShield XGT™ is a patent-pending metal conversion process that bonds a protective coating with the aluminum microstructure, which means filiform corrosion can’t get a foothold to grow.

What Filiform Corrosion?

In accelerated corrosion tests, we subjected ProShield XGT™ to repeated exposures to a cocktail of popular deicing agents. Wheels with simulated damage, which extended all the way to the base metal, were put through 80 cycles of temperature, humidity, and drying exposures.

The results shown here – after the equivalent of roughly eight years of abuse – shows no significant filiform corrosion.

SAE J2334 test protocol with SAEJ2721 corrosion cocktail including magnesium, calcium, sodium, and potassium chloride salts.  Full test results available upon request.

Test results
XGT Valve Stem

ProShield XGT™ Protects Against the Harshest Conditions

Just clean with soap and water

Throw away your caustic wheel cleaning products, because ProShield XGT™ is easy to maintain with just soap and water. ProShield’s surface conversion process creates a hydrophobic surface – so water, oil – and contaminants, just bead up and roll off.

  • Mechanical – Chip resistant.
  • Thermal – Maintains gloss up to 400°F.
  • Chemical – Tested against acids, bases, and everything between.
  • 30W Motor Oil
  • Automotive Grease
  • Diesel Fuel
  • DOT3 Brake Fluid
  • Methyl Ethyl Ketone
  • Sodium Chloride
  • Easy to Clean with Just Soap and Water. 
More Information